With Zebra’s Printer Setup Utility, configuring your Link-OS printers to optimize performance is easy – no specialized knowledge required.
To use, tap the printer you wish to configure. Your printer and device will instantly begin communicating via Bluetooth. Then follow the simple setup wizards that walk you through how to set specific printing parameters – such as calibration, media type, ribbon, printer language and print quality – to optimize performance. If your Android device does not support Tap and Pair via NFC, the app can discover your printer via Bluetooth and network, or connect to it via USB.
With the Security Assessment Wizard feature, assess your Zebra printer security posture, compare your settings against security best practices and make changes based on your conditions to increase protection.
Bluetooth Printers are now manageable, even in the field!
Normally, Bluetooth printers are not easily managed – particularly when they are used in the field by a mobile workforce. Zebra’s Printer Setup Utility makes Bluetooth printers manageable via the Cloud by allowing the app to retrieve files from your CLoud storage provider and then transfer these files to the printers for configuration and printer OS updates. This simplifies the management of Link-OS Bluetooth printers, dramatically improving both printer ROI and the productivity of a mobile workforce.
Help is just a tap away - use the "Zebra Assist" feature to send your printer's configuration directly to Zebra's support team.
The following Zebra Link-OS printers series are supported: ZD400, ZD500, ZD600, ZQ300, ZQ500, ZQ600, ZT200, ZT400, ZT500, ZT600, iMZ and QLn, ZR338, ZR600.
The app supports Bluetooth Classic, network and USB On-The-Go connectivity.
Note: Tap/Pair and USB On-The-Go can only be used on those Android devices that support NFC (for Tap/Pair) and USB OTG.
Với Tiện ích cài đặt máy in Zebra Zebra, việc định cấu hình máy in Link-OS của bạn để tối ưu hóa hiệu suất rất dễ dàng - không cần kiến thức chuyên môn.
Để sử dụng, chạm vào máy in bạn muốn cấu hình. Máy in và thiết bị của bạn sẽ ngay lập tức bắt đầu liên lạc qua Bluetooth. Sau đó, làm theo các trình hướng dẫn thiết lập đơn giản hướng dẫn bạn cách đặt các tham số in cụ thể - chẳng hạn như hiệu chuẩn, loại phương tiện, ruy băng, ngôn ngữ máy in và chất lượng in - để tối ưu hóa hiệu suất. Nếu thiết bị Android của bạn không hỗ trợ Chạm và Ghép qua NFC, ứng dụng có thể khám phá máy in của bạn qua Bluetooth và mạng hoặc kết nối với thiết bị qua USB.
Với tính năng Trình hướng dẫn đánh giá bảo mật, hãy đánh giá tư thế bảo mật máy in Zebra của bạn, so sánh các cài đặt của bạn với các thực tiễn tốt nhất về bảo mật và thực hiện các thay đổi dựa trên các điều kiện của bạn để tăng khả năng bảo vệ.
Máy in Bluetooth hiện có thể quản lý được, ngay cả trong lĩnh vực này!
Thông thường, máy in Bluetooth không dễ quản lý - đặc biệt khi chúng được sử dụng trong lĩnh vực này bởi lực lượng lao động di động. Tiện ích cài đặt máy in Zebra Zebra giúp máy in Bluetooth có thể quản lý thông qua Cloud bằng cách cho phép ứng dụng truy xuất tệp từ nhà cung cấp lưu trữ CLoud của bạn và sau đó chuyển các tệp này sang máy in để cập nhật hệ điều hành và cấu hình máy in. Điều này giúp đơn giản hóa việc quản lý máy in Bluetooth Link-OS, cải thiện đáng kể cả ROI của máy in và năng suất của lực lượng lao động di động.
Trợ giúp chỉ là một cú nhấn chuột - sử dụng tính năng "Hỗ trợ Zebra" để gửi trực tiếp cấu hình máy in của bạn đến nhóm hỗ trợ của Zebra.
Các dòng máy in Zebra Link-OS sau đây được hỗ trợ: ZD400, ZD500, ZD600, ZQ300, ZQ500, ZQ600, ZT200, ZT400, ZT500, ZT600, iMZ và QLn, ZR338, ZR600.
Ứng dụng hỗ trợ kết nối Bluetooth Classic, mạng và USB On-The-Go.
Lưu ý: Chỉ có thể sử dụng Tap / Pair và USB On-The-Go trên các thiết bị Android hỗ trợ NFC (cho Tap / Pair) và USB OTG.